5 Responses

  1. [...] Here is the blog page where I found the solution. [...]

  2. Dao Tuan Anh April 24, 2011 at 2:08 am |

    You don’t have to use bluesoleil to transmitt audio from PC to MW-600, after install lenovo driver for Win 7 to recognize all drivers, just go to Control Panel > Sound > In tab Playback choose Speaker (2-Bluetooth Hands-free Audio) then click Set Dafault, now when I turn on MW600 and connect it to PC, it will use MW600 as default speaker and when I disconnect to turn off Mw600, windows will be use the system sound :) it wonderful, good luck.

  3. gaming laptops review May 27, 2011 at 11:14 am |

    Thank you for the driver

  4. 7ravler June 23, 2011 at 10:57 pm |

    I’ve found a way to fix this :

    1. update your lap top’s bluetooth driver with the latest one (in my case i’ve got the latest from the HP driver site)

    2. after the installation is complete connect your MW600 and let it install all of it;s features

    3. it will say it’s not fully installed , click finish and than go to Control Panel\All Control Panel Items\Devices and Printers\ Properties on the Mw600 Icon and select SERVICES from the tab and uncheck the SEMC HLA and OK

    It worked fine for me , audio headset , handsfree , control etc

    HP lap top , win 7 pro 64 bit

  5. ronaldo July 4, 2011 at 8:20 pm |

    The answer:

    3. it will say it’s not fully installed , click finish and than go to Control Panel\All Control Panel Items\Devices and Printers\ Properties on the Mw600 Icon and select SERVICES from the tab and uncheck the SEMC HLA and OK

    Is correct. Did it work!!! There is a one drive that is required and if you disable the SEMC HLA service, it will work fine…

    good help!

Comments are closed, but trackbacks and pingbacks are open.